Ideally is built into the wall, leaving visible only the edge of the water blade or is placed on top of the wall showing the overflow of the water.
As an option you can add LED light strip that buckles in the water blade, illuminating the water at its source where it gushes.
The outlet of the water pipe is on the rear entry.
For fitting the water blade in existing pool, we recommend you contact the manufacturer of your pool.
To create a water blade fountain you will need:
- Water Blade made of Stainless Steel (150cm)
- LED Light Strip (optional)
Usually available in four different colors:
White, Blue, Green and Red.
- Pump
For the water blade of 150cm at 1.2 meter height we recommend a pump of 15.000lph.
- Base / Tank
The base is the tank that is based at the bottom of the water blade where the water falls and through the pump goes up again on the back of the water blade and is recycled. Usually the pump is mounted inside the base and can be hidden with a net and pebbles. The base may have the shape or material of your choice and must be watertight. For minimum loss of water and sufficient water for the better functioning we recommend as minimum dimensions 30cm deep, 40-50cm width (depends on the height of the water blade) and length at least the same as the length of the water blade.